Meta Quest 3
HOLD THE ORB IN EITHER HAND
With neither front trigger held, hold either front trigger away from controls to bring the Orb to that hand. Release to let go. Move the Orb faster for brighter TONE, or push and pull it to change FILTER. Aim at knobs, sliders and menus and use either front trigger to operate them.
MOVE THE PANELS
Hold the front right trigger on a panel’s side handle to move and turn it. Keep holding that trigger and pull the right joystick back to bring the panel closer, or push it forward to move the panel away. Release the panel to return the right joystick to the default setting of adjusting DELAY TIME and REVERB.
USE YOUR FREE HAND
While holding the Orb in either hand, hold the free hand's front trigger away from controls. Move that hand up / down to bend PITCH, or forward / back to lengthen / shorten DELAY TIME. The hand holding the Orb continues to control TONE and FILTER. Swap hands by releasing the Orb, then grabbing it with the other hand.
INSIDE GRIP TRIGGERS
Left side grip dims the orb; right side grip brightens it, between 10% and 100%.
JOYSTICKS
Left joystick
left / right - HARMONY
up / down - OVERDRIVE
Right joystick
left / right - DELAY TIME
Right joystick up/down - REVERB
OTHER
X pauses or resumes the orb’s orbit.
Y toggles Mute.
A switches the orb light off/on with a short press. Hold A for 3 seconds to show or hide the movable controller diagram;
B toggles tooltips.
Click the left Quest thumbstick to show or hide the colour palette; click the right thumbstick to toggle the stereo audio meter.
Desktop
Adjusting the view: Use + to move the view closer, and − to move farther away. When nothing is held, scroll up to move closer or down to move farther, including over controls. Hold the mouse wheel (middle button) and drag to pan. Right-drag away from the light to change the viewing angle. Reset layout restores the starting position, angle and distance. These view controls do not move your headset in VR.
Interacting with the instrument: Grab the light with the left mouse button: faster movement raises Tone. Grab with the right mouse button and move up/down for Pitch. Hold both buttons for both gestures. While holding the light, scroll up to bring it closer or down to move it farther away. This also sweeps Filter: away increases it; closer decreases it. Press O to pause or resume automatic rotation; X also works. Release pitch to return to Tuning. Shift also works for pitch.
Drag a panel’s side handle to move it; scroll while holding it for depth, or hold Alt to turn it. Drag knobs up or down, or click and drag sliders. Hold a knob or slider and scroll for fine adjustment. V toggles the colour palette and B toggles the audio meter.
Randomise
Click RANDOMISE to turn it on or off. Hold it for half a second to reveal its light grey slider, then drag left to slow down or right to speed up. Release to keep the speed and return to the label. The range is 0.5×–5×, with a mark at normal 1×. In a headset, hold the trigger over the button or pinch and hold it.
+ view closer − view farther
R record S stop P play Space audio 1–2 select track
A orb light V colour palette
B audio meter O orbit Y mute J tooltips H tour K guide Esc close tour / release
Hand Tracking
CONTROL THE ORB
With hand tracking, pinch the orb nearby with either hand, or close either hand to bring the light to your palm. Moving the orb faster brightens TONE, and moving it forward or back changes FILTER. Pinch or close your free hand and move it up or down to bend PITCH, or forward or back to change DELAY TIME. Swap hands by releasing the Orb, then grabbing it with the other hand.
MOVE UNITS + ADJUST EFFECTS
To move one of the units such as the instrument, recorder or sampler, release the orb away from the item you want to change (the orbs location can prevent adjustment). Use the line picker and move the controls or press buttons to operate.
Record
Wave Sampler accepts uploaded loops or headset mic recordings using MIC REC. Microphone access should have been granted when the app was opened. Press MIC REC and record the audio eg your voice, a pet, an instrument or other audio source. Stop completes the sample.
Trim Start / End, adjust Level, enable COMPRESS for quiet audio and smooth the loop with Crossfade. Preview auditions it; Use Sample loads it into WAVE.
Select Track 1 or 2 and press Record to capture the instrument. Play listens to your layers. Export saves a WAV. Save / Load keep the used samples and your AAG project. Drag the little crop handles on each waveform to retain a section, or drag back out to restore it. Drag the round fade handles inward to lengthen each fade. Cropping keeps the original timeline position. Stop playback to crop; fades can be adjusted while playing.
Tooltips and Tour
Tooltips are off by default. Switch on the ? tooltip button on the meter unit to see an explanation when you hover over a control or point at it in VR. The winding tour icon on the meter unit opens the guided tour in VR; the Tour button opens it on desktop.